When a toilet is leaking, doesn’t flush properly, or doesn’t work at all, it’s usually time to replace it. Whether you’re looking to update the look of your bathroom or you just can’t stand the smell of that old fixture, installing a new toilet is a DIY project that doesn’t have to be as difficult as it looks.
A toilet bowl is one of the most important plumbing fixtures in your home. It plays a vital role in the waste removal and the refilling of water from the toilet tank. The toilet bowl is also the most common place in a home where a leak can occur, so it is very important to keep yours in good repair. For professional help, you can visit https://www.apexdoyourplumbing.com/.
When you need to replace your toilet, you will want to take some time to research the different options. This will help you to make the best choice for your needs and budget. There are many things to consider, including the bowl shape, height, and design. It is important to choose a bowl that will fit into the space you have, and that will be comfortable to use.
Next, you will need to check the condition of your toilet flange and wax ring seal. These are the parts that mount your toilet to your floor and connect it to the drain pipe. If the flange or seal is broken, you will need to replace them. These parts can be purchased from a local hardware store, or you may need to pay a plumber to replace them.
After you have removed the toilet flange and wax ring seal, it will be time to install your new toilet bowl. This is a messy job, so it is a good idea to have some gloves on.
First, remove the two retaining nuts from the base of your toilet tank and then unscrew them from the tank flange. This can be done with an adjustable wrench or with a set of channel-type pliers. You will then be able to remove the tank from your toilet bowl.
If you have any remaining caulking on the bottom of the tank, run a utility knife along it to help pull it up from the toilet bowl. This will make it easier to lift the toilet up and off of the floor, as well as clear any water that is still inside.
Once you have the toilet bowl in place, it is important to secure it to the flange and closet bolts with the washers and nuts that are included in your replacement kit. Alternately tighten the nuts on each closet bolt, back and forth, until they are fully hand-tightened.
The tank on your toilet is the water-storing device that sits above the bowl. Its job is to keep water from leaking into the bowl as you flush. If the tank is broken, corroded, or otherwise outdated, you may need to replace it.
The toilet tank has several components that help it function properly. Some of these include a fill valve, float adjustment screw, and overflow tube. Some of these parts are located inside the tank, while others are outside it.
You can find replacement parts for these items at your local hardware store. Some of these parts are also available online.
A toilet that doesn’t fill with water after a flush can be a sign of a problem with the fill valve. Replacing the valve is a quick and inexpensive fix that doesn’t require special tools. If you’re unsure about how to replace the valve, ask a plumber for advice.
Some of the most common problems with the fill valve include a stuck float, a float arm that’s stuck in place, or a faulty float. If these issues aren’t fixed, you could end up with a leaky tank or a running toilet that wastes water and costs you more money on your monthly utility bill.
For a quick fix, remove the bolts that connect the bottom of the tank to the bowl using an adjustable wrench. Some toilets have rubber washers that you can use to guide the bolts through the cistern. If not, you can buy rubber washers at your local home improvement store.
To install the new tank, make sure the mounting holes in the tank are matched with the bowl’s mounting holes. Most tanks come with a rubber gasket that you insert into the hole at the base of the tank. You can purchase a replacement gasket at your local hardware store or use the old one from your previous tank.
You should also check the float arm to make sure it’s in working condition before you start replacing any components. This arm is connected to a float, which tells the fill valve when the tank needs refilling.
Whether it’s to enhance the look of your bathroom or add comfort, toilet seats can make a big difference. They can also make the entire experience of utilizing the toilet much more pleasant, so it’s important to take your time and find the right seat for you and your home.
A padded toilet seat is a great choice for those who find sitting on the hard surface of the toilet uncomfortable. Padded seats have a soft feel to them and are often warmer than unpadded ones when you first sit on them. However, it is important to check out customer reviews before purchasing a padded seat.
Another option for comfort is a raised toilet seat. These seats have handles on the sides to allow seniors to grip for support when sitting or standing up. Some models even have a lid that folds down to cover the bowl when it’s not in use.
The most common type of toilet seat is made of plastic. These are available in many different colors and styles. They are also more durable and easy to clean than wood toilet seats.
Other types of seats are made of a variety of materials, including metal and wood. Some are designed with decorative textile covers to add style and appeal. These covers can be removed to clean and can also be sprayed with anti-bacterial spray for hygiene purposes.
Some toilet seats have molded-in-place bumpers that prevent the seat from scratching the toilet or slipping while you’re seated on it. They can also help to reduce noise when you close the lid.
These seats are also available in a variety of colors, including white and gray. They can be found at a number of local home improvement centers and online retailers.
A deodorizing toilet seat is an excellent choice if you find that your bathroom tends to have unpleasant odors from previous occupants. These seats are designed to eliminate any odors from the toilet before they can be detected by you or anyone else in your home.
Fortunately, today’s toilet seats are so easy to install that it is usually not necessary to have a plumber come out to do the job. Most of these seats are installed using bolts that can be slid through the appropriate holes in the toilet bowl and nuts beneath the bowl that apply torque to the bolts to hold them in place.
Toilet installation can be a complicated project for someone unfamiliar with plumbing, so you should leave this job to the pros. You can get free, no-commitment estimates from plumbers in your area to help with the process.
The first step to installing a new toilet is removing the old one from the floor. This is a messy job and can be dangerous, so make sure you have an assistant to help you do it.
Next, inspect the flange (the piece that connects the toilet to the drain pipe on the floor) for damage or signs of leakage. If you find any, you can replace it with a new flange and bolts.
If your flange is in good shape, you can reuse it when you install the new toilet. You may need to trim the bolts to fit the toilet cap, but this shouldn’t be a problem.
To prepare the floor for a new toilet, wipe a PVC primer on the inside of the closet bend and on the outside of one end of a soil pipe. Apply PVC cement to those surfaces, and then twist the soil pipe into the closet bend.
Repeat this step on each side of the closet. You can do this in stages to minimize the risk of damaging your flooring.
When gluing the collar, align the holes in the soil pipe and closet bolt slots quickly before the cement sets. This prevents the flange from shifting while you work, and it helps to keep the soil pipe securely in place.
Once the flange is secure, you can move to the toilet bowl and seat assembly. Attach the plastic bolts that come with the kit through the seat hinges and through the holes in the toilet bowl, and then tighten them by hand.
After the toilet bowl and tank are attached, turn on the water supply line at the wall and flush it six times to ensure the new toilet is working properly. You can also check the tank for leaks.